Mitering Machines

The SAE10A is a 10 spindle variable angle mitering machine, with 2 diamond, 2 resin and 2 polishing spindles on a 0-45° mitering base and 4 spindles for the front and rear arris.  Polishing wheels are lifted pneumatically for a trouble-free high-quality finish.  Positioning of the spindles can be controlled by PLC.  Setting and display of glass thickness, miter angle, flat edge width and conveyor speed are by touch screen.  The precision cast alloy conveyor with enclosed bearings ensures smooth operation and high loading capacity.  Inlet and outlet conveyors useRead More...

Capable of simultaneous edging and mitering with high polish, this straight line workhorse is built in the usual Metral style - heavy and precise. With its positive worm gear drive on double crown gears along with an internal clutch linkage on the front conveyor, the conveyor process glass up to 1 1/4” (30mm) thick. Employing an oil slide double chain conveyor system, the pads themselves are in high density nylon with polyamid shoes which ride on a special antifriction replaceable wear strip.Read More...

The variable angle wheel bed, consisting of 3 wheels (1 diamond wheel and 2 polishing wheels), can be set at 0° to run flat edge, with the final four arris wheels (two front and two back) producing 45° seams. Mitering can be carried out at any angle between 0-60° by driving the wheel bed from the control panel to any angle desired. High polish is generated using a cerium oxide impregnated polishing wheel.