SELIM SAE10M Glass Mitering Machine

in
SELIM SAE10M
 
 

The SAE10A is a 10 spindle variable angle mitering machine, with 2 diamond, 2 resin and 2 polishing spindles on a 0-45° mitering base and 4 spindles for the front and rear arris.  The glass thickness is adjusted by turning a knob on the control panel and displayed on a digital meter.  The mitering angle is adjusted by turning a knob on the control panel and the angle is indicated on a scale disc.  The conveyor speed is manually controlled with the hand-wheel of a stepless reducer with high to low speed range.  Glass removal is regulated by adjusting a hand-wheel on the input conveyor. Inlet and outlet conveyors use timing belts for long life and precise operation. 

Characteristics:

Power requirement: as per customer request
Glass thickness: 3-26mm (1/8” -1)
Minimum glass size: 120mm (4 ¾”)
Mitering Angle: 0-45°
Conveyor speed: 0.5-3.5 m/min (19”-137”/min)
Inlet conveyor height: 880mm (335”)
Total weight: 3500kg (7,716 lbs)
Length: 6900mm (272”)
Width: 1200mm (47.25”)
Height: 2800mm (110.25”)