Italiana Machine Laminated Glass Cutting Table

The Lamina tables from Italiana Macchine have been designed for cutting double-lite laminated glass (up to 6+6mm laminates). The cutting process is carried out by two cutting heads which simultaneously score the top and bottom sheet which is held in clamped position by two fixed bridges. Following the score, a rubber wheel exerts pressure on the top sheet as it travels across the sheet causing the glass cut to run. Subsequently, a pneumatically actuated breaker bar pops up from beneath the lower score line and completes the break in the glass. A resistance heated wire is then brought to the vinyl interlayer from below . At the same time, clamps along the left clamping bridge are activated pulling the glass apart as the vinyl melts away.

Sheet measurements are controlled automatically, where a numerically controlled bridge moves to a programmed position against which the glass is brought to rest before the cutting operation. Multiple cut programs can be stored in memory for future use.